Rolled curbs send a jolt through your car when you enter and exit your driveway, causing damage to your tires, steering, exhaust and bumpers.
Designed to reduce the impact of a rolled curb entry, Curb Ramp fills the gap in your driveway gutter to create a smooth transition from your driveway to the street. Unlike ready-made solutions, this DIY curb ramp can be shaped to fit any size driveway curb – at half the price for the same coverage. Suitable for use with all types of vehicles, this product can be used for both and residential and commercial purposes. So what are you waiting for? Save some dough and save your car. Try Curb Ramp today.
SIGNIFICANTLY REDUCES BUMPING & ELIMINATES SCRAPING OF SMALLER CARS.
Valid: 22nd September 2021
After looking and looking at premade driveway ramps that would not fit my curb I came across Curb Ramp. I just made my second ramp (I used a metal paint mixer powered by a drill this time) and that made it a lot easier to mix. It is so nice just gliding onto the driveway now, especially when the kid is asleep in the back of the car. The only “issue” is having to remember everyone else does not have a driveway ramp.
My wife and I both own low cars, and this has made our driveway entrance much smoother. Two boxes covered our 16 ft driveway and ran us $240 total with shipping. All and all we are happy with it and it saved us about $300 had we bought 4 sections of the alternate rubber ramp we were looking at.
I love my ramp. First, I used a steel plate. It made so much noise every time someone use my driveway as a turnaround point and whenever I drove my 911 over it. It’s been down for a year, with some of the worst rain and hottest summer we’ve had in years. It was easy to install. I just ordered another can of glue so I can change the color from black to something close to the color of the sidewalk by putting down the glue and sprinkling light coat of cement over it. I love how easy it is to work with.
I dig the look of my new curb! Made my ramp removable so I can pull it into the yard on street sweeping days. My only complaint is the shipping cost. Better than paying for new shocks though, that’s for sure.
Gabriel┃Santa Clarita, CA
EASILY MIX, SHAPE AND SPREAD TO FIT ANY SIZED DRIVEWAY ENTRANCE.
Pre-made driveway curb ramps are more expensive for the same coverage and cannot be easily adjusted to fit your curved driveway’s rolled curb. This product can be used as a driveway “curb bridge” where ready-made product simply are not going to work – whether they don’t fit the gutter shape or are too expensive for the desired coverage by volume. Bottom line? Curb Ramp saves you hundreds of dollars and offers the flexibility to make a custom ramp to fit the unique shape and size of your driveway entrance.
The amount of material required to fill your curb gutter depends primarily on the width of your driveway and depth of the curb gap. Each unit of Curb Ramp covers approximately 1.5 cubic feet. For standard regulation rolled curb gaps, a single kit will cover about 7-9 ft. when spread to slope at a 20°-25° incline over 18-22”. A typical double car driveway at 15-18′ wide with a standard rolled curb of about 4″ tall requires approximately two (2) kits.
For additional information on how much product your driveway needs, see our installation information and check out our latest installation video: How To Make A Removable Driveway Ramp For Lowered Cars in which two (2) full kits were installed to cover approximately 16-18 ft of a standard rolled curb driveway entrance.
Related Articles: Curb Ramp – Material Estimations
Curb Ramp can be installed by one person in about an hour. The components are mixed together and will need to dry before you can drive over it. The curation period depends on the moisture and temperature of the curb surface as well as the air temperature and humidity. The material takes less time to cure in hotter temperatures. To be safe, avoid driving over it for 48 hours. Read more: Installation Instructions
The finished ramp is semi-porous, which allows for some drainage naturally. To further facilitate street water drainage at the end of your driveway, shape or “feather out” the ends of the ramp to help guide water safely around it. (In other words, don’t make a hard right angle at either end of your ramp..) This prevents the build-up of debris so your driveway entrance remains unobstructed and allows water to easily circumvent your driveway entrance and enter back into the curb channel. If you plan on installing a drainage channel, please refer to this article.
Curb Ramps are highly durable. Depending on the severity and fluctuations of weather, they can last for years without needing any aesthetic and/or structural repairs. The first Curb Ramp was installed 15 years ago and just received some minor aesthetic repairs and a new paint job. That being said, Curb Ramp assumes no liability, expressed or implied, as to the architecture, engineering or workmanship of any project.
Yes, you can create a removable ramp by using a substrate.
NOTE: For curb-bonded Installations (without a protective substrate), Curb Ramp can be removed once installed using a floor scraper, however removing the ramp destroys the bond of the material and thus cannot be reinstalled at a later time. A re-installation would require a new kit.
Curb Ramp is a much more permanent solution than pre-made driveway ramps. While ready-made products are more portable, they often don’t fit the gutter shape, are much more expensive and can’t be customized to fit all sized curbs. Curb Ramp provides a custom-fit solution with the removable option by simply using a protective substrate.
Stop Bottoming Out
Why risk damaging your car every time you use your driveway?
Concrete driveway ramps don’t bond well to existing rolled curbs and break when exposed to heat, cold, and pressure and are sometimes …
Bottoming out can damage a car’s oil pan, front splitter, muffler, engine cover / skid plate, and bumper. Prevent car damage with Curb Ramp, a convenient and affordable rolled …
Curb Ramp can be used on any type of curb. The number of material required depends primarily on the width of your driveway and depth of the curb gap. For standard regulation rolled …