Description
Our versatile QuickLift Ramp Kit is designed to add height to existing ramps or create custom-sized ramps. Each piece measures 20×20″ and is available in three heights: 1″, 2″, and 2.75″, with optional edge pieces for a smoother transition.
These ramp pieces are easy to customize. For example, to create a 20x10x2″ clearance ramp, you can cut one 2″ piece in half.
Additionally, these ramp pieces and edge pieces can be stacked together like building blocks, allowing you to achieve the desired height and configuration for your project. Whether you need to increase the clearance of a curb or driveway or build a ramp from scratch, our rubber ramp pieces offer a flexible and durable solution.
Note: Additional edge pieces can be purchased separately here.
![QuickLift Ramp Kit Cutting and Assembly Instructions Diagram Diagram showing cutting and assembly instructions for QuickLift Ramp Kit components](https://curbramp.us/wp-content/uploads/2024/01/QuickLift-Ramp-Kit-for-Elevated-Car-Clearance-Curb-and-Driveway-10-1.jpg)
2-Inch Height Example Ramp
This diagram shows how to create a custom ramp using one 20″ x 20″ x 2″ rubber piece and four edge pieces, each measuring 20″ x 5″.
Steps:
- Cut the Main Piece:
- Start with the main rubber piece measuring 20″ x 20″ x 2″.
- Cut this piece in half horizontally to create two 20″ x 10″ sections labeled A and B.
- Arrange the Pieces:
- Place sections A and B side by side. This will form the main part of the ramp.
- Attach the Edge Pieces:
- Attach two edge pieces (20″ x 5″) to the top and bottom of section A.
- Attach the other two edge pieces (20″ x 5″) to the top and bottom of section B.
- Final Dimensions:
- The total width of the ramp will be 20″.
- The total length of the ramp will be 40″.
This setup ensures a smooth slope and provides a seamless transition from the ground to the elevated surface, making it perfect for car clearance, curbs, and driveways.
Example Use Case for the QuickLift Ramp Kit
This image illustrates a common scenario where the QuickLift Ramp Kit can be used effectively. If your driveway has an abrupt descent over a ridge, it can cause the bottom of your car to scrape or bottom out. In this example, two of the 2-inch height ramps are used—one for each tire—to lift the tires and provide the necessary clearance.
![QuickLift Ramp Kit for Elevated Car Clearance, Curb and Driveway (22)](https://curbramp.us/wp-content/uploads/2024/01/QuickLift-Ramp-Kit-for-Elevated-Car-Clearance-Curb-and-Driveway-22.jpg)
![QuickLift Ramp Kit for Elevated Car Clearance Curb and Driveway Close-up of a vehicle wheel using a QuickLift Ramp Kit for safe curb and driveway clearance.](https://curbramp.us/wp-content/uploads/2024/07/QuickLift-Ramp-Kit-for-Elevated-Car-Clearance-Curb-and-Driveway-13-1.jpg)
How to Use the Ramps
- Assemble the Ramp:
- Follow the steps shown in the previous diagram to cut and assemble the ramp pieces using construction adhesive or a similar strong adhesive.
- Determine Ramp Placement:
- Drive your car slowly until it begins to scrape.
- Mark the spot where the front tires are positioned at this point.
- Install the Ramps:
- Place the assembled ramps at the marked positions on the driveway.
- Ensure the ramps are securely in place.
- Customize for Your Needs:
- If you need more than 2 inches of clearance, you can stack additional ramp pieces or use pieces of different heights (1″, 2.75″) as needed.
- You can also cut the pieces to fit your specific driveway dimensions, ensuring a perfect fit for your situation.
By following these steps, you can effectively prevent your car from scraping or bottoming out on your driveway, ensuring a smoother and safer ride.
More Information
Return Policy
Return Period: Customers may return ramps within 30 days of purchase.
Condition for Return: Ramps must be in good condition, used only for initial testing, and repackaged in original packaging.
Processing Fee: A 3% processing fee, covering non-refundable PayPal charges, will be deducted from the refund.
Refund Process: Refunds are processed upon carrier receipt of the returned item, with a credit issued to the original payment method, minus the 3% fee.
Similar Products
Protect your vehicle’s front splitter from damage with our Low Clearance Vehicle Ramps.
Perfectly suited for steep driveways, curbs, and street gutter dips, these ramps ensure a smooth transition for low-profile and lowered cars, preventing bottoming out on challenging inclines. Built to last and designed for easy integration with your driveway, these ramps offer reliable protection without being intrusive. For a permanent solution, simply anchor them with construction adhesive to keep them securely in place.
Explore how these ramps can safeguard your vehicle today!
Glide Guard Modular Driveway Ramps offer a practical solution for low-clearance vehicles facing steep inclines, declines, and mid-driveway ridges. Designed to provide a gentle lift, these ramps protect your car’s front splitter from scraping and prevent the mid-section from bottoming out. With Glide Guard, you can navigate troublesome areas with confidence, ensuring a smooth and safe driving experience.
Discover how Glide Guard Modular Driveway Ramps can enhance your vehicle’s clearance today!
Shipping & Sourcing
To ensure timely order fulfillment, we may source ramps from independent manufacturers, suppliers, or resellers if our inventory runs low. While names and descriptions may vary for identification purposes on our website, we guarantee consistent quality.
Need further assistance?
Share your photos with us at curbramp.us@gmail.com, and our team will assist you in finding the ideal ramp or mix-and-match solution customized to your needs. Rest assured, we’ll honor any current deals upon receiving your message.